EVO Performance Parts
Home My Account Checkout What's New? EVO TECH

Live Help

AGP Front Mount Intercooler: EVO X
Product Rating
Write A Review
On sale for the next 15 minutes
Price: $731.95

Logo Stencil:
2010+ Model
Heat Dispersion Coating

Add to cart
Add to wish list

Product Overview
AGP Front Mount Intercooler: EVO X


Fits: Lancer EVO X 2008+

Enhance the performane of your 2008-up Mitsubishi Evolution X with the first front mount intercooler available, and now with cast end tanks! The AGP Turbo FMIC features cast aluminum end tanks attached to a 20"x13"x3.5" bar and plate core. This core has the largest surface area of any other core on the market. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support. It also clears the factory lower under-tray so you do not need to remove it. It cools at 90-99% efficiency under almost all conditions and has less than .75psi pressure drop at 450 hp of airflow. You couldn't heat soak this intercooler if you tried.

Stop asking who manufactures our core for us. We're tired of explaining it, and we're not going to tell you. All you need to be concerned with is that you're getting the best intercooler for your Evo X. Look up reviews, look up dyno numbers, look up track times. Our intercooler steps it up and delivers.

Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to no heatsoak. This is a great upgrade for a stock Evo X, and will help you make more and more power down the road as we continue to release products.

Dyno results showed peak gains of 20 ft/lbs and 25 whp, and nowhere did it lose power throughout the entrire RPM range. These tests were done on a car with a stock turbo, minor bolt ons, and a very conservative ECUTEK tune.

This is the same intercooler we run on our shop car, which so far has made over 530whp and trapped 11.55 @ 123.

The FMIC includes:

20"x13"x3.5" bar and plate core with cast end tanks weighing in at 24.5 lbs.
Silicone hoses and clamps
All necessary installation hardware
**2010 models will require a new mounting bracket as Mitsubishi decided to change the lower intercooler mount. $25**

Available with a black heat dispersion coating that helps "pull" the heat from the intercooler core- aiding with thermal transfer and increasing intercooler efficiency.

Available with the AGP logo stencil that will allow you to paint our logo on the intercooler any color you like. We recommend using brake caliper paint, it seems to hold up the longest.
Recommended products list
Customers who bought this product also bought the following products:
Nokya H11 Hyper Yellow Fog Light Bulbs
Tanabe Front 4pt Lower Arm Bar - EVO X
Mitsubishi OEM 6 Speed Clutch Disk - EVO 9
BBS CS 18x8 5x114.3 ET40 Sport Silver Wheels -82mm PFS/Clip Required
StopTech Slotted Front Rotors Set -2008-2014 EVO X
STM Clutch Fork Stop - For Exedy Twin Disc
Mitsubishi OEM Bypass Valve - Evo 8/9
Cusco Zero 1 Coilover Normal Mount for Mitsubishi EVO X
Mitsubishi OEM In-Cabin Air Purifier Filter - EVO X
ACT Xtreme Duty 6 Puck Solid Disc Clutch Kit - EVO 8/9
There are no reviews available for this product.
Write A Review
Write A Review
Note: Fields marked with a * must be filled in.

Your Name: *
Your Review's Title: *
Your Rating: *
Your Review: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code

See our listings on Find the best prices We are a member of the MastaMinds Network This site is SSL Secure! We Accept all major credit cards through paypal We are a member of the Better Business Bureau